Model compounds / Catalog / Belwax

Designed for manufacturing of cast models for precise casting of complex geometrical shapes. The obtained parts practically do not require further mechanical processing and this allows to reduce consumption of materials, steel, non-ferrous alloys, energy consumption for their production.

Model compound К-2 (O)

Model compound К-2М (А)

Model compound ZGV-101

Model compound ZGV-102

Model compound ZGV-103

Hydrophobic cable filler "Belwax GZ-1"

It is intended for filling the sheath of communication cables to prevent moisture from penetrating into the cable core. Packaging options: 175 kg barrel.

Preservative hydrophobic filler "Belwax GZ"

It is intended for anti-corrosion protection of the strand releases of the bundle of reinforcement ropes and the parts of the anchor unit of the pre-tensioning system of the reinforced concrete shell. Packaging options: 175 kg barrel.

Characteristic	Norm

Limit strength at static, MPa, not less than	3,0
Heat resistance, С°, not less than	34
Mass fraction of ash, %, no more than	0,15
Dropping temperature, С°	75-90
Acid number, mg KOH per 1 g of oil, no more than	-

Characteristic	Norm

Limit strength at static, MPa, not less than	3,0
Heat resistance, С°, not less than	37
Mass fraction of ash, %, no more than	0,10
Dropping temperature, С°	75-90
Acid number, mg KOH per 1 g of oil, no more than	-

Characteristic	Norm

Limit strength at static, MPa, not less than	2,5
Heat resistance, С°, not less than	30
Mass fraction of ash, %, no more than	0,15
Dropping temperature, С°	75-90
Acid number, mg KOH per 1 g of oil, no more than	5

Characteristic	Norm

Limit strength at static, at
а) (19±1) С°, MPa, not less than	5,5
б) (20±1) С°, MPa, not less than *	5,0*
Heat resistance, С°, not less than	38
Mass fraction of ash, %, no more than	0,1

Characteristic	Norm

Limit strength at static, at (19±1) С°, MPa, not less than	5,5
Heat resistance, С°, not less than	36
Mass fraction of ash, %, no more than	0,1
Dropping temperature, С°	85-95
Acid number, mg KOH per 1 g of oil, no more than	-

Characteristic	Norm

Kinematic viscosity at 100°C, mm²/s, within	20.00-50.00
Dropping point, °C, within	70-90
Presence of water-soluble acids and alkalis	absence
Water content	absence
Flash point in an open crucible, °C, not less than	180

Characteristic	Norm

Kinematic viscosity at 100°C, mm²/s, within	17.00-22.00
Melting point, °C, within	65-75
Water content	none
Corrosive effect on metals	Must pass tests
Penetration at 25°C without stirring, mm-1	50-100