Concentrated lubricating and cooling liquid "Ultra-M" / Lubricating and cooling technological materials / Catalog / Belwax

It is used as a process medium in blade and abrasive processing of non-ferrous metals, aluminum alloys and normally processed steels. Packaging options: 180 kg barrel.

Characteristic	Norm

Appearance	homogeneous liquid from yellow to brown
Density at 20 °C, g/cm³	0.900 - 1.100
Kinematic viscosity at 50 °C, mm²/s, no more than	80
Acid number, mg/ KOH/g, no less than	12
Alkalinity reserve of aqueous emulsion with a mass fraction of 3% in ml 0.1N НС1, no less than	30
Corrosive aggressiveness of aqueous emulsion with a mass fraction of 3%	Must pass the test
Hydrogen index (pH) of aqueous emulsion concentrate with a mass fraction of 5%	9-10
Stability of aqueous emulsion concentrate with a mass fraction of 3%	Must pass the test
Content of mechanical impurities, %, no more than	0.03
Content water-soluble acids and alkalis (pH)	6-10
Tendency to foaming of aqueous emulsion concentrate with a mass fraction of 3%, cm³, no more than	450
Foam stability, cm³, no more than	220